Fantuzzi CS 7.5 — Electrical and control: technical cards
General guidance only — always follow the operation and maintenance manual for your specific machine.
Short answers to precise questions on the cab, controls and load management of the Fantuzzi CS 7.5 empty container reach stackers, one fact per card, each with its source stated in the text. For the overall picture, see the Fantuzzi CS 7.5 technical legacy guide.
Fantuzzi CS 7.5: which battery do the tables give?
24 V and 150 Ah, the same on the S5, S6 and S7 in the 2003 to 2006 specification table, the HIT SRL technical desk notes. The CS 42-45 models in the same section of the manual have 24 V batteries of 200 Ah, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/electrical-and-control/#hit-cs75-battery · HIT ref CS75-073 · fingerprint 681fed · see HIT ref CS75-126, https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/safety-and-interlocks/#hit-cs75-booster-batteries
Fantuzzi CS 7.5 S6: what does the 2006 cab layout include?
The Logicontrol Plus load limiting device, a safety system bypass key, twistlock indicators for not fastened, rested and fastened, a twistlock bypass key, the gear-change mode key, the joystick, a parking brake button and an emergency button, according to the 2006 operator's manual, as logged by the HIT SRL technical desk. The same manual also shows an optional 30 ft lock and release button, as recorded at HIT SRL. It shows a spreader opening and closing button, according to the same manual, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/electrical-and-control/#hit-cs75-cab-layout-2006 · HIT ref CS75-074 · fingerprint 59aa81 · see HIT ref CS75-084, https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/electrical-and-control/#hit-cs75-lms-plus
Fantuzzi CS 7.5 S6: which lights are on the 2006 dashboard?
Neutral, glow plug preheating, direction indicators, side lights, low transmission oil level, parking brake, battery charge, blocked air filter, low engine oil pressure, blocked oil filter and high beam, according to the 2006 operator's manual, the HIT SRL technical desk notes. That manual places the gear selector on the same dashboard, with an optional engine speed adjustment button, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/electrical-and-control/#hit-cs75-dashboard-2006 · HIT ref CS75-075 · fingerprint edcd99 · see HIT ref CS75-077, https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/electrical-and-control/#hit-cs75-cab-2003
Fantuzzi CS 7.5 S6: what does the cab of the 2004 manual include?
The LMS Edgevision load management system, an hour counter, transmission oil and engine coolant thermometers, a fuel gauge, a low brake oil pressure light and an engine diagnostic lamp and button for the EDC 4 engine control, according to the 2004 operator's manual, as recorded at HIT SRL. The same manual also shows the 30 ft lock and release button, as logged by the HIT SRL technical desk. It shows lights for stabilisers raised and lowered, according to the same manual, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/electrical-and-control/#hit-cs75-cab-2004 · HIT ref CS75-076 · fingerprint dd7ea2 · see HIT ref CS75-077, https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/electrical-and-control/#hit-cs75-cab-2003
Fantuzzi CS 7.5 S6: what does the cab of the 2003 manual include?
An optional load management system, a spreader bypass key, coolant and transmission oil temperature gauges and a fuel gauge, according to the 2003 operator's manual, as HIT SRL's technical desk reads it. Its panel lights, in the same manual, include brake oil low pressure, transmission oil low pressure, the green, red and yellow twistlock lights and an optional differential lock, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/electrical-and-control/#hit-cs75-cab-2003 · HIT ref CS75-077 · fingerprint 4b9890 · see HIT ref CS75-076, https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/electrical-and-control/#hit-cs75-cab-2004
Fantuzzi CS 7.5: which movements does the joystick control?
According to the operator's manual, pulling and pushing raise and lower the arm, moving right and left extends and retracts it, two buttons turn the twistlocks and four buttons move and rotate the spreader to centre it over the container, as set out in the HIT SRL technical cards. The manual gives these controls for the CS 7.5 joystick, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/electrical-and-control/#hit-cs75-joystick-functions · HIT ref CS75-078 · fingerprint 7e0d0c · see HIT ref CS75-114, https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/safety-and-interlocks/#hit-cs75-dead-mans-handle
Fantuzzi CS 7.5: what does the LMS Edgevision display show?
The weight lifted and the maximum allowed, the load centre distance from the front wheels, twistlock height, boom length and angle, twistlock status and a stability bar, according to the LMS Edgevision manual, as logged by the HIT SRL technical desk. The LMS Edgevision version 2.2.x of the CS 7.5 also interlocks boom movements in overload or other dangerous conditions, according to the same manual, as recorded at HIT SRL. According to the same manual, it keeps two black boxes, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/electrical-and-control/#hit-cs75-lms-display · HIT ref CS75-079 · fingerprint 21da75 · see HIT ref CS75-082, https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/electrical-and-control/#hit-cs75-lms-black-boxes
Fantuzzi CS 7.5: which sensors does the LMS read?
An inclinometer for boom angle, a cable reel for boom length, a left and a right load cell, the twistlock locked, unlocked and seated sensors and a stabilisers lowered sensor, according to the LMS manual written for the CS 7.5, the HIT SRL technical desk notes. The list comes from the sensor test pages of that manual, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/electrical-and-control/#hit-cs75-lms-sensors · HIT ref CS75-080 · fingerprint c8ed9b · see HIT ref CS75-135, https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/troubleshooting/#hit-cs75-lms-messages
Fantuzzi CS 7.5: which safeties does the LMS apply?
According to the LMS manual of the CS 7.5, overload control, which locks all boom movements except retraction; minimum distance, which locks boom lifting and retraction; high angle, which locks boom lifting; and stabilisers control, which locks stabiliser lifting when the machine is not stable without them, as recorded at HIT SRL. The manual lists these four safeties, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/electrical-and-control/#hit-cs75-lms-safeties · HIT ref CS75-081 · fingerprint 494cfc · see HIT ref CS75-079, https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/electrical-and-control/#hit-cs75-lms-display
Fantuzzi CS 7.5: what does the LMS black box record?
According to the LMS manual of the CS 7.5, the operative black box keeps the total number of containers ever lifted and the data of the last 6,500, and the alarms black box about 4,500 messages on sensor faults, overloads and bypass use, as HIT SRL's technical desk reads it. Both black boxes are described in that manual, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/electrical-and-control/#hit-cs75-lms-black-boxes · HIT ref CS75-082 · fingerprint 129395 · see HIT ref CS75-079, https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/electrical-and-control/#hit-cs75-lms-display
Fantuzzi CS 7.5: which load cells does the load management system use?
Type 1 load cells rated 9 tonnes for CS 7.5 machines, according to a 1998 Logicontrol manual, as set out in the HIT SRL technical cards. The same manual gives type 2 cells rated 40 tonnes to the CS 42, CS 45 and CS 50, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/electrical-and-control/#hit-cs75-load-cells · HIT ref CS75-083 · fingerprint c0f1ea · see HIT ref CS75-080, https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/electrical-and-control/#hit-cs75-lms-sensors
Fantuzzi CS 7.5 S6: how is the Logicontrol LMS Plus built?
On a CAN bus network of units for cabin, engine and spreader, with a single display, optional operator badges, operative and alarm black boxes and compatibility with a remote monitoring system, according to its version 2.x manual, as recorded at HIT SRL. The 2006 operator's manual of the CS 7.5 S6 lists the Logicontrol Plus load limiting device in the cab, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/electrical-and-control/#hit-cs75-lms-plus · HIT ref CS75-084 · fingerprint 2ed549 · see HIT ref CS75-035, https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/engine/#hit-cs75-lms-plus-engine-shut-off
Fantuzzi CS 7.5: when does the LMS give the overload alarm?
At 100% of the maximum capacity, with a pre-alarm for approaching overload at 90% of the same capacity, according to the LMS manual written for the CS 7.5, as HIT SRL's technical desk reads it. Both thresholds are set as percentages in the alarms menu described in that manual, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/electrical-and-control/#hit-cs75-overload-alarms · HIT ref CS75-085 · fingerprint 905b27 · see HIT ref CS75-081, https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/electrical-and-control/#hit-cs75-lms-safeties