Fantuzzi CS 7.5 — Related models: technical cards
General guidance only — always follow the operation and maintenance manual for your specific machine.
Short answers to precise questions on the related CS models of the Fantuzzi CS 7.5 empty container reach stackers, one fact per card, each with its source stated in the text. For the overall picture, see the Fantuzzi CS 7.5 technical legacy guide.
Fantuzzi CS 42 S: how much can it lift?
Up to 45,000 kg under the twistlocks at the shortest radii, according to its capacity table, which gives ratings by radius and by boom length from 8.75 to 15.15 m, as HIT SRL's technical desk reads it. In the same table the rating falls to 32,000 kg at 3.85 m with booms of 10.75 to 13.75 m, as logged by the HIT SRL technical desk. It falls to 8,000 kg at 8.2 m with the longest boom, or 10,000 kg with the stabilisers down, according to the same table, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/related-models/#hit-cs75-cs-42-s-capacity · HIT ref CS75-138 · fingerprint 0f269a · see HIT ref CS75-140, https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/related-models/#hit-cs75-cs-42-s-driveline
Fantuzzi CS 42 S: which engines does the handbook list?
Four, according to the handbook, as set out in the HIT SRL technical cards. The handbook gives a FIAT 8210 of 13,798 cm3, 189 kW gross at 2,200 rpm and 942 Nm at 1,200 rpm; a Volvo TD 100 G of 9,600 cm3, 203 kW at 2,200 rpm; a Mercedes OM 442 of 15,078 cm3, 213 kW at 1,850 rpm; and a Volvo TD 121 G of 11,980 cm3, 256 kW at 2,200 rpm, the HIT SRL technical desk notes. The data come from its component pages, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/related-models/#hit-cs75-cs-42-s-engines · HIT ref CS75-139 · fingerprint 6cb56a · see HIT ref CS75-024, https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/engine/#hit-cs75-motor-table-2004-2006
Fantuzzi CS 42 S: which transmission, axle and tyres does it have?
According to the handbook, a Clark 34000 or Clark 5000 power-shift transmission with four forward and four reverse gears and inching, a Fantuzzi drive axle with oil-bath disc brakes and four front tyres 18.00-33, 36 ply rating, at 9 bar, the HIT SRL technical desk notes. The same handbook has speed and direction selected electrically from the cab, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/related-models/#hit-cs75-cs-42-s-driveline · HIT ref CS75-140 · fingerprint c47bad · see HIT ref CS75-046, https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/transmission-and-driveline/#hit-cs75-tyres-and-wheels
Fantuzzi CS 42 S: what sound level and travel position does the handbook give?
According to the handbook, 76 dB(A) at the operator's position, measured to CEN/TC 150 and FEM IV, and a travel position with the container held lengthwise and low, as recorded at HIT SRL. The same handbook has a 40 ft container rotated only after lowering it to no more than 1 metre above the ground and extending the boom fully, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/related-models/#hit-cs75-cs-42-s-noise-and-travel · HIT ref CS75-141 · fingerprint 23e48f · see HIT ref CS75-139, https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/related-models/#hit-cs75-cs-42-s-engines
Fantuzzi CS 42 SP: what does its piggy-back chart give?
According to the one-page chart, 42 t in the first row up to the fourth container and 27 t at the fifth, 24 t in the second row and 9 t in the third, with spreader and piggy-back, as HIT SRL's technical desk reads it. These are the values of the CS 42 KM piggy-back chart in the CS 42-45 manuals, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/related-models/#hit-cs75-cs-42-sp-chart · HIT ref CS75-142 · fingerprint dd171e · see HIT ref CS75-013, https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/identification/#hit-cs75-brochure-load-chart
Fantuzzi CS 50: which Logicontrol software type does it use?
The CS 45 software type when the CS 50 has the Opera cab, according to the 1998 Logicontrol manual, as set out in the HIT SRL technical cards. The manual applies that type to all CS 45 and CS 50 machines with the Opera cab and its CS 42 type to the CS 45 KM and to CS 42 machines without it, the HIT SRL technical desk notes. The same manual describes a version of the system for CS 42 machines with reduced safeties and wiring, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/related-models/#hit-cs75-cs-50-and-logicontrol · HIT ref CS75-143 · fingerprint 655e6d · see HIT ref CS75-084, https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/electrical-and-control/#hit-cs75-lms-plus