Fantuzzi CS 7.5 — Identification: technical cards
General guidance only — always follow the operation and maintenance manual for your specific machine.
Short answers to precise questions on the models, main data and documentation of the Fantuzzi CS 7.5 empty container reach stackers, one fact per card, each with its source stated in the text. For the overall picture, see the Fantuzzi CS 7.5 technical legacy guide.
Fantuzzi CS 7.5: how do the manuals describe the machine?
As an arm truck for lifting heavy loads, used for the combined transport of containers from railway wagons to road vehicles, according to the general description of the operator's manuals, the HIT SRL technical desk notes. This description opens Section 1 of the CS 7.5 operator's manuals from 2003 to 2012, as set out in the HIT SRL technical cards. It repeats the wording found in the manuals of the larger CS and RS reach stackers, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/identification/#hit-cs75-general-description · HIT ref CS75-001 · fingerprint 8d2f48 · see HIT ref CS75-002, https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/identification/#hit-cs75-main-parts
Fantuzzi CS 7.5: which main parts does the general description name?
Ten, according to the general description of the operator's manual: rear steering wheels, electrical compartment, front driving wheels, lifting cylinder, operator's cab, fixed arm, moving arm, damping cylinder, spreader and twistlocks, as recorded at HIT SRL. The list accompanies that description in Section 1 of the CS 7.5 operator's manual, as logged by the HIT SRL technical desk. The same manual gives the front pair of wheels as the driving wheels and the rear pair as the steering wheels, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/identification/#hit-cs75-main-parts · HIT ref CS75-002 · fingerprint 668d44 · see HIT ref CS75-001, https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/identification/#hit-cs75-general-description
Fantuzzi CS 7.5: is it described as an empty container handler?
Yes: the operator manual of the Powertronic System version 2.1.x states that this software version is typically installed on CS45 KM, KC or CS7.5 machines, the latter described as empty handlers, the HIT SRL technical desk notes. The same manual is written for the stackers CS45 KM/KC and CS7.5, and the wording is that of the manual, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/identification/#hit-cs75-empty-handler · HIT ref CS75-003 · fingerprint 1562ca · see HIT ref CS75-004, https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/identification/#hit-cs75-brochure-range
Fantuzzi CS 7.5: how does the Fantuzzi brochure present the model?
As part of the brochure's Empty Container Reach stacker Range, with the versions CS 7.5 S and CS 7.5 S6, as recorded at HIT SRL. The brochure carries the Fantuzzi Reggiane name and that of the Fantuzzi Liftrucks Division, and it adds a page of technical features, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/identification/#hit-cs75-brochure-range · HIT ref CS75-004 · fingerprint f3b643 · see HIT ref CS75-005, https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/identification/#hit-cs75-launch-year
Fantuzzi CS 7.5: when was the model launched?
In 1992, according to the Fantuzzi Reggiane brochure of the Empty Container Reach stacker Range, as HIT SRL's technical desk reads it. The year is the brochure's own statement, and the brochure itself carries no date, as recorded by the HIT SRL technical desk. The same brochure shows the machine carrying a container rotated end-on to pass through doorways or high racks.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/identification/#hit-cs75-launch-year · HIT ref CS75-005 · fingerprint 03e66e · see HIT ref CS75-004, https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/identification/#hit-cs75-brochure-range
Fantuzzi CS 7.5: which versions do the tables cover and what do they weigh?
Three versions, the CS 7.5 S5, S6 and S7, weighing 37,500, 39,000 and 41,000 kg empty according to the specification table, as set out in the HIT SRL technical cards. That table, in the 2003 to 2006 operator's manuals, gives the three versions in adjacent columns, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/identification/#hit-cs75-versions-and-weights · HIT ref CS75-006 · fingerprint 153db7 · see HIT ref CS75-008, https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/identification/#hit-cs75-dimensions-2003-2006
Fantuzzi CS 7.5 S6: how high does it stack?
Six 8 ft 6 in containers or five 9 ft 6 in containers, according to the brochure, as logged by the HIT SRL technical desk. The 2012 Terex table gives the CS 7.5 S6 a first-row stacking height of five 9 ft 6 in or six 8 ft 6 in containers and four or five in the second row, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/identification/#hit-cs75-stacking-height · HIT ref CS75-007 · fingerprint e4c791 · see HIT ref CS75-013, https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/identification/#hit-cs75-brochure-load-chart
Fantuzzi CS 7.5: what are the main dimensions in the 2003-2006 manuals?
A 5,000 mm wheelbase, a 1,200 mm rear overhang, a height of 4,100 mm and a turning radius of 6,900 mm, according to the dimension drawing of the 2003 to 2006 manuals, the HIT SRL technical desk notes. The same drawing gives an overall length of 10,225 mm for the S5 and S7 and 11,225 mm for the S6, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/identification/#hit-cs75-dimensions-2003-2006 · HIT ref CS75-008 · fingerprint aa8252 · see HIT ref CS75-009, https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/identification/#hit-cs75-brochure-dimensions
Fantuzzi CS 7.5: what dimensions does the brochure give?
A 5,150 mm wheelbase, a 1,200 mm rear overhang and a height of 4,300 mm, with an overall length of 10,370 mm on the S5 and S7 and 11,370 mm on the S6, according to the brochure drawing, as recorded at HIT SRL. The drawing is on the technical features page of the Fantuzzi Reggiane brochure, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/identification/#hit-cs75-brochure-dimensions · HIT ref CS75-009 · fingerprint 4a972c · see HIT ref CS75-008, https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/identification/#hit-cs75-dimensions-2003-2006
Fantuzzi CS 7.5 S6: what weight and dimensions does the 2012 Terex table give?
According to the 2012 Terex table, a service weight of 40,500 kg, a 5,150 mm wheelbase, a turning radius of 10,200 mm with a 40 ft container and 7,850 mm with a 20 ft container, and a height of 4,300 mm, as HIT SRL's technical desk reads it. The figures are in the CS 7.5 S6 column of that specification table, as logged by the HIT SRL technical desk. The CS 45 KM manual of 2013 repeats that table, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/identification/#hit-cs75-data-2012 · HIT ref CS75-010 · fingerprint 833d8b · see HIT ref CS75-008, https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/identification/#hit-cs75-dimensions-2003-2006
Fantuzzi CS 7.5 S6: how much can it lift in each row?
10 t in the first row, 8 t in the second and 5 t in the third, according to the 2012 Terex specification table, as set out in the HIT SRL technical cards. The same table marks the piggy-back option as not available for this model, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/identification/#hit-cs75-capacity-by-row · HIT ref CS75-011 · fingerprint 083114 · see HIT ref CS75-012, https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/identification/#hit-cs75-load-chart-2012
Fantuzzi CS 7.5 S6: what does the 2012 load chart show?
According to the 2012 load chart, 10 t in the first row up to the fifth container and 7.6 t at the sixth, 8 t in the second row up to the fourth and 4.5 t at the fifth, 5 t in the third row up to the third and 4 t at the fourth, and 0.5 t in a fourth row two containers high, as logged by the HIT SRL technical desk. The top values are marked for 8 ft 6 in containers in that chart, as recorded at HIT SRL. The chart of the 2012 manual reaches 16,050 mm, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/identification/#hit-cs75-load-chart-2012 · HIT ref CS75-012 · fingerprint 478cb2 · see HIT ref CS75-013, https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/identification/#hit-cs75-brochure-load-chart
Fantuzzi CS 7.5 S6: what load chart does the brochure give?
According to the brochure chart, 10 t in the first row up to the fifth container and 7.5 t at the sixth, 8 t in the second row up to the fourth and 4.5 t at the fifth, and 5 t in the third row up to the third and 4.5 t at the fourth, the HIT SRL technical desk notes. The chart stacks six 8 ft 6 in containers, as set out in the HIT SRL technical cards. The same chart reaches 16,050 mm overall, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/identification/#hit-cs75-brochure-load-chart · HIT ref CS75-013 · fingerprint 9e245a · see HIT ref CS75-012, https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/identification/#hit-cs75-load-chart-2012
Fantuzzi CS 7.5: what noise level and travel speed do the tables give?
85 dB(A) outside and 76 dB(A) in the cab, with a travel speed of 25 km/h empty and 23 km/h loaded, according to the specification table, as recorded at HIT SRL. The values are the same for the S5, S6 and S7 in that table of the 2003 to 2006 manuals, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/identification/#hit-cs75-noise-and-speed · HIT ref CS75-014 · fingerprint d0d90f · see HIT ref CS75-052, https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/transmission-and-driveline/#hit-cs75-speed-by-stability
Fantuzzi CS 7.5 S6: how fast does the boom lift and lower?
It lifts at 0.44 m/s with a load and 0.50 m/s without, and lowers at 0.38 m/s with a load and 0.57 m/s without, according to the 2012 Terex specification table, as HIT SRL's technical desk reads it. The figures are in the CS 7.5 S6 column of that table, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/identification/#hit-cs75-lifting-speeds · HIT ref CS75-015 · fingerprint 425d3f · see HIT ref CS75-014, https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/identification/#hit-cs75-noise-and-speed
Fantuzzi CS 7.5 S6: which models share the 2012 Terex table?
The CS 45 KM, CS 45 KL, CS 45 KS, RS 55 and RS 60, which appear with the CS 7.5 S6 in one specification table and one load chart, as set out in the HIT SRL technical cards. The same table also appears in the CS 45 KM manual of 2013, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/identification/#hit-cs75-multimodel-table-2012 · HIT ref CS75-016 · fingerprint 5a7747 · see HIT ref CS75-010, https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/identification/#hit-cs75-data-2012
Fantuzzi CS 7.5: where are its tables in the 2003-2006 manuals?
In a family Section 1 that also holds the tables of the CS 42-45 KC, KM, KL and KS and of the RS 50 and RS 55, the HIT SRL technical desk notes. The CS 7.5 S5-S6-S7 dimension drawing and specification table sit in that section, and the CS 45 KM manual of 2004 carries the same CS 7.5 tables, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/identification/#hit-cs75-family-section · HIT ref CS75-017 · fingerprint 605d35 · see HIT ref CS75-008, https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/identification/#hit-cs75-dimensions-2003-2006
Fantuzzi CS 7.5: which options does the brochure list?
Air conditioning, a hydraulic sliding cab, a winch and hook, a vertical lift device with height preselection, a printer, an emergency pump for steering and hydraulic functions, other engine and transmission configurations and special colour schemes, according to the brochure, as recorded at HIT SRL. The same brochure also pictures hydropneumatic compensators as options, as logged by the HIT SRL technical desk. It pictures dry disc brakes on the rear wheels as options, according to the same brochure, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/identification/#hit-cs75-brochure-options · HIT ref CS75-018 · fingerprint 918073 · see HIT ref CS75-009, https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/identification/#hit-cs75-brochure-dimensions
Fantuzzi CS 7.5: which features does the brochure point out?
An extra strong telescopic rotating spreader, an extra wide heavy duty drive axle, wet disc brakes on the front wheels, a centralised boom greasing system and a cooling system for hydraulic and brake oil, according to the brochure, as HIT SRL's technical desk reads it. The features page of the brochure also shows electrics with a fault detecting device, as logged by the HIT SRL technical desk. The same page of the brochure shows easy access to the radiator and the hydraulic accumulators, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/identification/#hit-cs75-brochure-features · HIT ref CS75-019 · fingerprint fab3f3 · see HIT ref CS75-009, https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/identification/#hit-cs75-brochure-dimensions
Fantuzzi CS 7.5: what does the data plate record?
Model, serial number, year of construction, unladen weight with equipment, maximum capacity and the front and rear tyre pressures, according to the plate reproduced in the CS 7.5 manuals, as set out in the HIT SRL technical cards. The manuals give type and serial number as the reference for any communication with the manufacturer, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/identification/#hit-cs75-data-plate · HIT ref CS75-020 · fingerprint 617d14 · see HIT ref CS75-006, https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/identification/#hit-cs75-versions-and-weights
Fantuzzi CS 7.5: when did Terex take over the Fantuzzi port equipment business?
In July 2009 according to published sources, after an agreement of August 2008, its termination in December 2008 and a new agreement at the end of the first quarter of 2009, as logged by the HIT SRL technical desk. The same sources state that Terex completed the acquisition of the port equipment business of Fantuzzi Industries together with Noell Crane, as recorded by the HIT SRL technical desk. The CS 7.5 manual of 2012 carries the name of Reggiane Cranes and Plants S.p.A. and Terex branding.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/identification/#hit-cs75-terex-acquisition · HIT ref CS75-021 · fingerprint 23dd39 · see HIT ref CS75-022, https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/identification/#hit-cs75-brand-owner-today
Fantuzzi CS 7.5: who supports the Fantuzzi Reggiane machines today?
Konecranes, which states that it has owned the Fantuzzi Reggiane brand from the acquisition of Terex Material Handling & Port Solutions, completed on 4 January 2017, the HIT SRL technical desk notes. Published sources state that new Fantuzzi Reggiane machines are no longer available and that Konecranes is the official provider of support and genuine spare parts for them, as recorded by the HIT SRL technical desk. The CS 7.5 brochure itself carries the Fantuzzi Reggiane name.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/identification/#hit-cs75-brand-owner-today · HIT ref CS75-022 · fingerprint 9bd65a · see HIT ref CS75-021, https://www.hitsrl.it/technical-resources/guides/fantuzzi-cs7-5/identification/#hit-cs75-terex-acquisition