Fantuzzi SF — Identification: technical cards
General guidance only — always follow the operation and maintenance manual for your specific machine.
Short answers to precise questions on the models, main data and documentation of the Fantuzzi SF side-loader lift trucks, one fact per card, each with its source stated in the text. For the overall picture, see the Fantuzzi SF technical legacy guide.
Fantuzzi SF: what kind of machine is it?
According to its manuals, the Fantuzzi SF is a side-lift truck for materials such as timber, steel and pipe and cement products, as set out in the HIT SRL technical cards. The 2003 operator's manual describes it as moving these loads from the production line to the store and from the store to the means of transport, the HIT SRL technical desk notes. The 1998 SideLIFTS manual and the 2004 editions open with the same description, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-sf/identification/#hit-sf-what-kind-of-machine · HIT ref SF-001 · fingerprint b60a81 · see HIT ref SF-002, https://www.hitsrl.it/technical-resources/guides/fantuzzi-sf/identification/#hit-sf-main-components
Fantuzzi SF: which main parts does the general description name?
The general description of the manuals names nine main parts: rear driving wheels, front steering wheels, mast assembly, hoist cylinder, operator's cab, hydraulic reservoir, engine bonnet, frame and forks, the HIT SRL technical desk notes. It is the drawing that opens the 2003 operator's manual of the SF U models, and the 1998 SideLIFTS manual uses the same list, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-sf/identification/#hit-sf-main-components · HIT ref SF-002 · fingerprint 7577d9 · see HIT ref SF-003, https://www.hitsrl.it/technical-resources/guides/fantuzzi-sf/identification/#hit-sf-sf-u-models-2003
Fantuzzi SF U: which models does the 2003 operator's manual cover?
The operator's manual of February 2003 covers eight models, the SF 30 U, SF 35 U, SF 40 U, SF 45 U, SF 50 U, SF 55 U, SF 60 U and SF 65 U, as logged by the HIT SRL technical desk. The manual has one specification sheet for each, as recorded at HIT SRL. Each model has its own sheet in the general information section of the manual, from the SF 30 U to the SF 65 U, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-sf/identification/#hit-sf-sf-u-models-2003 · HIT ref SF-003 · fingerprint 5c8164 · see HIT ref SF-010, https://www.hitsrl.it/technical-resources/guides/fantuzzi-sf/identification/#hit-sf-sf-70u-french-sheet
Fantuzzi SF 30 U to SF 45 U: what capacity and weight do the 2003 sheets give?
The 2003 sheets give 3,000 kg for the SF 30 U, 3,500 kg for the SF 35 U, 4,000 kg for the SF 40 U and 4,500 kg for the SF 45 U, all with stabilisers, the HIT SRL technical desk notes. The same sheets give unladen weights of 5,800 kg for the SF 30 U and SF 35 U and 6,000 kg for the SF 40 U and SF 45 U, as set out in the HIT SRL technical cards. The sheets give the nameplate as the reference, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-sf/identification/#hit-sf-sf-30u-to-45u-capacity · HIT ref SF-004 · fingerprint 777aae · see HIT ref SF-005, https://www.hitsrl.it/technical-resources/guides/fantuzzi-sf/identification/#hit-sf-sf-50u-to-65u-capacity
Fantuzzi SF 50 U to SF 65 U: what capacity and weight do the 2003 sheets give?
The 2003 sheets give 5,000 kg for the SF 50 U, 5,500 kg for the SF 55 U, 6,000 kg for the SF 60 U and 6,500 kg for the SF 65 U, as recorded at HIT SRL. The same sheets give them all with stabilisers, as logged by the HIT SRL technical desk. Unladen weights are 7,800 kg for the SF 50 U and SF 55 U and 8,200 kg for the SF 60 U and SF 65 U, according to the specification sheets of the 2003 operator's manual, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-sf/identification/#hit-sf-sf-50u-to-65u-capacity · HIT ref SF-005 · fingerprint 53f296 · see HIT ref SF-004, https://www.hitsrl.it/technical-resources/guides/fantuzzi-sf/identification/#hit-sf-sf-30u-to-45u-capacity
Fantuzzi SF U: what are the main dimensions in the 2003 sheets?
According to the 2003 specification sheets, the SF 30 U to SF 45 U are 4,200 mm long and 2,000 mm wide, with a 2,450 mm pitch and turning radii of 1,300 mm inside and 4,200 mm outside, as HIT SRL's technical desk reads it. In the sheets of the same operator's manual, the SF 50 U to SF 65 U are 4,450 mm long and 2,000 mm wide, as logged by the HIT SRL technical desk. The same sheets give them a 2,600 mm pitch and turning radii of 1,500 and 4,400 mm, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-sf/identification/#hit-sf-dimensions-2003 · HIT ref SF-006 · fingerprint 535881 · see HIT ref SF-005, https://www.hitsrl.it/technical-resources/guides/fantuzzi-sf/identification/#hit-sf-sf-50u-to-65u-capacity
Fantuzzi SF U: what is the pitch in the specification sheets?
The pitch is the wheelbase, according to another edition of the same manual, which heads the row with the word for wheelbase, as set out in the HIT SRL technical cards. The 1998 SideLIFTS tables give the same 2,450 mm and 2,600 mm values under wheelbase, as recorded by the HIT SRL technical desk. The 2003 edition keeps the word pitch on the sheets of all eight U models.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-sf/identification/#hit-sf-pitch-is-wheelbase · HIT ref SF-007 · fingerprint 257bed · see HIT ref SF-006, https://www.hitsrl.it/technical-resources/guides/fantuzzi-sf/identification/#hit-sf-dimensions-2003
Fantuzzi SF U: what travel speeds and noise levels do the 2003 sheets give?
The 2003 sheets give 22/24 km/h for the SF 30 U to SF 45 U and 26/28 km/h for the SF 50 U to SF 65 U, under a heading printed as without load / with load, as logged by the HIT SRL technical desk. The same sheets give 85 dB(A) outside and 78 dB(A) in the cab for every model, as recorded at HIT SRL. The 1998 tables put the same pairs under a with / without load heading, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-sf/identification/#hit-sf-speeds-and-noise-2003 · HIT ref SF-008 · fingerprint b46d4a · see HIT ref SF-005, https://www.hitsrl.it/technical-resources/guides/fantuzzi-sf/identification/#hit-sf-sf-50u-to-65u-capacity
Fantuzzi SF 45 U: what does the January 2004 sheet give?
The January 2004 sheet gives the SF 45 U 4,500 kg capacity, 8,000 kg unladen weight and 28/26 km/h without and with load, the HIT SRL technical desk notes. The same sheet gives a length of 4,350 mm, a 2,600 mm pitch, 8.25-15 tyres and a 12 V, 140 Ah battery, as set out in the HIT SRL technical cards. Its values differ from those of the 2003 SF 45 U sheet, for example in unladen weight and length, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-sf/identification/#hit-sf-sf-45u-2004-sheet · HIT ref SF-009 · fingerprint b5c9a2 · see HIT ref SF-010, https://www.hitsrl.it/technical-resources/guides/fantuzzi-sf/identification/#hit-sf-sf-70u-french-sheet
Fantuzzi SF 70 U: what does the 2004 sheet give?
The sheet of January 2004 gives the SF 70 U 6,000 kg maximum capacity, 10,950 kg unladen weight and 28/26 km/h, as recorded at HIT SRL. The same sheet gives a length of 4,450 mm, a width of 2,200 mm, a 2,600 mm wheelbase, 300-15 tyres and a 12 V, 140 Ah battery, as logged by the HIT SRL technical desk. The SF 70 U does not appear among the eight models of the 2003 sheets, which stop at the SF 65 U, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-sf/identification/#hit-sf-sf-70u-french-sheet · HIT ref SF-010 · fingerprint 104c2a · see HIT ref SF-009, https://www.hitsrl.it/technical-resources/guides/fantuzzi-sf/identification/#hit-sf-sf-45u-2004-sheet
Fantuzzi SF: which models does the 2003 hoist lubrication figure cover?
According to the 2003 SF maintenance manual, the hoist lubrication figure covers the SF 30 U to SF 65 U and the E versions SF 30 E, SF 40 E, SF 50 E and SF 60 E, as HIT SRL's technical desk reads it. The same figure covers the SF 80, SF 90, SF 100, SF 120, SF 150 and SC 200, according to the manual, as logged by the HIT SRL technical desk. The manual shows a lubrication layout for each group of models, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-sf/identification/#hit-sf-hoist-figure-models · HIT ref SF-011 · fingerprint 717092 · see HIT ref SF-003, https://www.hitsrl.it/technical-resources/guides/fantuzzi-sf/identification/#hit-sf-sf-u-models-2003
Fantuzzi SF: what separates the U models from the SF 45, SF 50 and SF 60 in 1998?
The transmission: in the 1998 SideLIFTS tables the U models, from the SF 30 U to the SF 60 U, have a hydrostatic transmission, while the SF 45, SF 50 and SF 60 without the U have a hydrodynamic transmission, as set out in the HIT SRL technical cards. The tables list both lines side by side, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-sf/identification/#hit-sf-u-and-non-u-lines · HIT ref SF-012 · fingerprint d78059 · see HIT ref SF-019, https://www.hitsrl.it/technical-resources/guides/fantuzzi-sf/identification/#hit-sf-axle-maker-parts-lists
Fantuzzi SF 30 U and SF 40 U: what do the 1998 tables give?
The 1998 SideLIFTS tables give 3,000 and 4,000 kg capacity at a 600 mm load centre, a 4,000 mm lift with 800 mm free lift, 22/24 km/h with and without load, a 20% maximum gradient and unladen weights of 5,800 and 6,000 kg, as recorded at HIT SRL. Both run on 27.10-12 tyres at 10 bar with a 2,450 mm wheelbase, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-sf/identification/#hit-sf-sf-30u-40u-1998-data · HIT ref SF-013 · fingerprint be9341 · see HIT ref SF-014, https://www.hitsrl.it/technical-resources/guides/fantuzzi-sf/identification/#hit-sf-sf-45-50-60-1998-data
Fantuzzi SF 45, SF 50 and SF 60: what do the 1998 tables give?
The 1998 SideLIFTS table gives 4,500, 5,000 and 6,000 kg capacity, a 4,000 mm lift with 1,000 mm free lift, travel speeds with and without load of 28/30, 26/28 and 24/26 km/h, maximum gradients of 24, 22 and 20% and unladen weights of 7,400, 7,800 and 8,800 kg, as HIT SRL's technical desk reads it. In the same table all three are 4,350 mm long and 2,000 mm wide with a 2,600 mm wheelbase, as logged by the HIT SRL technical desk. The table gives 8.25-15 tyres on the SF 45 and SF 50 and 300-15 on the SF 60, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-sf/identification/#hit-sf-sf-45-50-60-1998-data · HIT ref SF-014 · fingerprint 2355d6 · see HIT ref SF-013, https://www.hitsrl.it/technical-resources/guides/fantuzzi-sf/identification/#hit-sf-sf-30u-40u-1998-data
Fantuzzi SF 45 U, SF 50 U and SF 60 U: what do the 1998 tables give?
The 1998 SideLIFTS table gives 4,500, 5,000 and 6,000 kg capacity, a 4,000 mm lift with 1,000 mm free lift and 26/28 km/h with and without load, as set out in the HIT SRL technical cards. The same table gives a 22% maximum gradient laden and unladen weights of 7,500, 7,800 and 8,200 kg, with tyres at 10 bar, the HIT SRL technical desk notes. The three are 4,450 mm long and 2,000 mm wide, with a 950/3,950 mm turning radius and a 3,500 mm aisle, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-sf/identification/#hit-sf-sf-45u-50u-60u-1998-data · HIT ref SF-015 · fingerprint c6006b · see HIT ref SF-013, https://www.hitsrl.it/technical-resources/guides/fantuzzi-sf/identification/#hit-sf-sf-30u-40u-1998-data
Fantuzzi SF: how does the 1998 lifting-height table change the rated figure?
According to the 1998 lifting-height table, the figure falls as the lift height grows, as logged by the HIT SRL technical desk. In the same table, on the SF 30 U it is 3,000 at 4,000 and 4,500 mm of lift and 1,500 at 6,000 mm, and on the SF 60 and SF 60 U it goes from 6,000 to 4,500, as recorded at HIT SRL. The same table lists duplex masts from 4,000 to 6,000 mm and triplex masts of 4,000, 5,000 and 6,000 mm, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-sf/identification/#hit-sf-lifting-heights-1998 · HIT ref SF-016 · fingerprint 7c423e · see HIT ref SF-014, https://www.hitsrl.it/technical-resources/guides/fantuzzi-sf/identification/#hit-sf-sf-45-50-60-1998-data
Fantuzzi SF 60 L, SF 60 and SF 80: what does the draft handbook give?
The draft handbook gives 6,000, 6,000 and 8,000 kg nominal capacity, a 4,000 mm lift with 600 mm free lift and 4,200 kg tractive effort laden at stall, the HIT SRL technical desk notes. The same handbook gives maximum laden gradients of 24, 22 and 24%, 23, 23 and 25 km/h laden road speed, 0.45, 0.45 and 0.40 m/s laden lift speed and unladen weights of 8,000, 9,400 and 10,500 kg, as set out in the HIT SRL technical cards. Its parts list is dated February 1986, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-sf/identification/#hit-sf-sf-60-sf-80-draft · HIT ref SF-017 · fingerprint 193b30 · see HIT ref SF-015, https://www.hitsrl.it/technical-resources/guides/fantuzzi-sf/identification/#hit-sf-sf-45u-50u-60u-1998-data
Fantuzzi SF: what is the S series?
The S series is a line of side lift trucks of 10, 12 and 15 tonnes built without stabilisers, according to an O.M.F. brochure, as recorded at HIT SRL. The brochure presents the series under the title of side lift trucks, with an S 150 in the photograph, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-sf/identification/#hit-sf-s-series-brochure · HIT ref SF-018 · fingerprint 7733eb · see HIT ref SF-012, https://www.hitsrl.it/technical-resources/guides/fantuzzi-sf/identification/#hit-sf-u-and-non-u-lines
Fantuzzi SF: which SF models have Kessler axles?
According to spare-parts lists of the axle maker Kessler, the SF 90/100 with 1,800 mm forks, the SF 200 and the S150/SF150 have Kessler axles, as HIT SRL's technical desk reads it. These are heavier side loaders than the U models, and each list names Fantuzzi as the customer, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-sf/identification/#hit-sf-axle-maker-parts-lists · HIT ref SF-019 · fingerprint 2bd9e3 · see HIT ref SF-012, https://www.hitsrl.it/technical-resources/guides/fantuzzi-sf/identification/#hit-sf-u-and-non-u-lines
Fantuzzi SF: when did Terex buy the Fantuzzi port equipment business?
According to published sources, Terex completed the purchase in July 2009, together with Noell Crane, as set out in the HIT SRL technical cards. The same sources state that Terex agreed to buy the port equipment business of Fantuzzi Industries in August 2008, terminated that agreement in December 2008 and reached a new agreement at the end of the first quarter of 2009, the HIT SRL technical desk notes. According to the same sources, the announced range included lift trucks, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-sf/identification/#hit-sf-terex-acquisition · HIT ref SF-020 · fingerprint a8bad2 · see HIT ref SF-021, https://www.hitsrl.it/technical-resources/guides/fantuzzi-sf/identification/#hit-sf-brand-owner-today
Fantuzzi SF: who owns the Fantuzzi Reggiane brand today?
According to published sources, Konecranes has owned it from the acquisition of Terex Material Handling & Port Solutions, announced on 16 May 2016 and completed on 4 January 2017, as logged by the HIT SRL technical desk. According to a local newspaper, Fantuzzi had taken over the former Reggiane works in 1994, and one published source gives 1992; HIT SRL service technicians report 1994 as the correct year.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-sf/identification/#hit-sf-brand-owner-today · HIT ref SF-021 · fingerprint b40b66 · see HIT ref SF-020, https://www.hitsrl.it/technical-resources/guides/fantuzzi-sf/identification/#hit-sf-terex-acquisition