Fantuzzi Reggiane attachments — Comparisons and terminology: technical cards
General guidance only — always follow the operation and maintenance manual for your specific machine.
Short answers to precise questions on the documented differences between models and spreader terminology of the Fantuzzi and Fantuzzi Reggiane machines, one fact per card, each with its source stated in the text. For the overall picture, see the Fantuzzi Reggiane attachments technical legacy guide.
SRP 45L and SRP2-45TL spreaders: how do they differ?
The SRP2-45TL weighs 12,200 kg against 9,500 kg and adds a twinlift for two empty 20 ft containers of 10,000 kg each, according to the 2013 CS 45 KM manual, as HIT SRL's technical desk reads it. Both lift 45,000 kg at 20 ft and 40,000 kg at 40 ft for full ISO 20 to 40 ft containers, according to the same manual.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-reggiane-attachments/comparisons-and-glossary/#hit-attach-compare-srp-45l-srp2-45tl · HIT ref ATT-098 · fingerprint 576086 · see HIT ref ATT-003, https://www.hitsrl.it/technical-resources/guides/fantuzzi-reggiane-attachments/reach-stacker-spreaders/#hit-attach-srp-45l-capacity
SRP2-45TL and SRP2-55TL spreaders: how do they differ?
The SRP2-55TL lifts 53,000 kg at 20 ft and 50,000 kg at 40 ft against 45,000 and 40,000 kg, according to the RS 55 maintenance manual, as logged by the HIT SRL technical desk. With the twinlift lowered it takes two full 20 ft containers of 25,000 kg each, where the SRP2-45TL takes two empty ones of 10,000 kg, according to the 2013 CS45 manual, as recorded at HIT SRL. Both weigh 12,200 kg and work at 170 bar, according to the RS 55 maintenance manual.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-reggiane-attachments/comparisons-and-glossary/#hit-attach-compare-srp2-45tl-55tl · HIT ref ATT-099 · fingerprint e966be · see HIT ref ATT-010, https://www.hitsrl.it/technical-resources/guides/fantuzzi-reggiane-attachments/reach-stacker-spreaders/#hit-attach-srp2-55tl-twinlift
SMHC 35, SMHC 40 TL and SMHC 45 spreaders: how do they differ?
The SMHC 45 also takes 45 ft containers and lifts 41 t eccentric and 45 t central, against 35 t and 40 t on the SMHC 35 and SMHC 40 TL, according to their manuals, as recorded at HIT SRL. The SMHC 40 TL adds a twinlift of 2 x 28 t, according to its manual, as logged by the HIT SRL technical desk. The weights given are 9.5 t, 11 t and 11.9 t, according to the three manuals.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-reggiane-attachments/comparisons-and-glossary/#hit-attach-compare-smhc-35-40tl-45 · HIT ref ATT-100 · fingerprint b0075d · see HIT ref ATT-043, https://www.hitsrl.it/technical-resources/guides/fantuzzi-reggiane-attachments/crane-spreaders-and-beams/#hit-attach-smhc-45
SVT 24 K, SS9GM Double Box and SF45GS spreaders: how do they differ?
The SVT 24 K and the SS9GM lift 8,000 and 9,000 kg of empty containers at 120 bar, while the SF45GS lifts full containers of 45,000 kg at 20 ft at 170 bar, according to the FDC manuals, as HIT SRL's technical desk reads it. Their side shifts are plus or minus 400, 350 and 140 mm, according to the same manuals, as recorded by the HIT SRL technical desk. Their weights are 3,000, 4,000 and 7,000 kg, according to those manuals.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-reggiane-attachments/comparisons-and-glossary/#hit-attach-compare-svt-ss9gm-sf45gs · HIT ref ATT-101 · fingerprint 39c718 · see HIT ref ATT-018, https://www.hitsrl.it/technical-resources/guides/fantuzzi-reggiane-attachments/front-lift-truck-spreaders/#hit-attach-svt-24-k-data
SRP, SVT 24 K and SF45GS spreaders: how do the twistlock wear limits differ?
The SRP and SVT 24 K manuals replace a twistlock when dimension a falls below 27 mm, while the SF45GS manual replaces it when a exceeds 10 mm, as set out in the HIT SRL technical cards. All three manuals also replace it when dimension D has fallen by more than 5%.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-reggiane-attachments/comparisons-and-glossary/#hit-attach-compare-twistlock-wear-limits · HIT ref ATT-102 · fingerprint 413506 · see HIT ref ATT-092, https://www.hitsrl.it/technical-resources/guides/fantuzzi-reggiane-attachments/maintenance-and-faults/#hit-attach-sf45gs-twistlock-wear
Fantuzzi Reggiane spreaders: what is a twinlift?
A set of retracting twistlocks in the centre of the spreader that lets a 40 ft spreader lift two 20 ft containers, according to the SMHC 40 TL and SRP2 manuals, as logged by the HIT SRL technical desk. The SMHC 40 TL manual allows the twin lift mode only with the spreader in the 40 ft position.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-reggiane-attachments/comparisons-and-glossary/#hit-attach-term-twinlift · HIT ref ATT-103 · fingerprint 05048d · see HIT ref ATT-099, https://www.hitsrl.it/technical-resources/guides/fantuzzi-reggiane-attachments/comparisons-and-glossary/#hit-attach-compare-srp2-45tl-55tl
Fantuzzi Reggiane crane spreaders: what is a flipper?
A pivoting guide arm that gathers the spreader onto the container, according to the SMHC 35 manual, as recorded by the HIT SRL technical desk. The manual fits six, driven by hydraulic rotary actuators, lets the operator choose which to use according to the arrangement of the containers and protects each actuator with a maximum pressure valve against impacts.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-reggiane-attachments/comparisons-and-glossary/#hit-attach-term-flipper · HIT ref ATT-104 · fingerprint 24cf47 · see HIT ref ATT-033, https://www.hitsrl.it/technical-resources/guides/fantuzzi-reggiane-attachments/crane-spreaders-and-beams/#hit-attach-smhc-35-flippers
Fantuzzi FDC spreaders: what is a Double Box spreader?
A spreader for empty containers that handles one container or two overlapped containers of the same size, according to the 2002 FDC 25 K7 maintenance manual, the HIT SRL technical desk notes. The FDC 25 K7 manuals call the SS9GM a Double Box spreader, and the Powertronic manual lists double box among its four spreader configurations.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-reggiane-attachments/comparisons-and-glossary/#hit-attach-term-double-box · HIT ref ATT-105 · fingerprint b5a0db · see HIT ref ATT-023, https://www.hitsrl.it/technical-resources/guides/fantuzzi-reggiane-attachments/front-lift-truck-spreaders/#hit-attach-ss9gm-reefers
Fantuzzi FDC spreaders: what is a gantry spreader?
The spreader type that the Powertronic manual places normally on the FDC 320 and higher, given in the G-series tables as a telescopic 20 to 40 ft gantry type, as recorded at HIT SRL. The SF45GS of the FDC 550 G5 manual is a gantry spreader for full ISO 20 to 40 ft containers, according to that manual.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-reggiane-attachments/comparisons-and-glossary/#hit-attach-term-gantry-spreader · HIT ref ATT-106 · fingerprint 1bd7ec · see HIT ref ATT-027, https://www.hitsrl.it/technical-resources/guides/fantuzzi-reggiane-attachments/front-lift-truck-spreaders/#hit-attach-fdc-g-series-spreader
Fantuzzi spreaders: what is pile sloping?
The tilting movement of the spreader that the manuals call pile sloping or side sloping, as HIT SRL's technical desk reads it. On the SRP 45 LSS and the SF45GS it comes from hydraulic cylinders along the centre beam, according to the 2013 CS 45 KM and FDC manuals, and the RS 55 table checks the side-sloping cylinder adjustment at 250 hours.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-reggiane-attachments/comparisons-and-glossary/#hit-attach-term-pile-sloping · HIT ref ATT-107 · fingerprint 76c699 · see HIT ref ATT-005, https://www.hitsrl.it/technical-resources/guides/fantuzzi-reggiane-attachments/reach-stacker-spreaders/#hit-attach-srp-45-lss