Fantuzzi Reggiane attachments — Front lift truck spreaders: technical cards
General guidance only — always follow the operation and maintenance manual for your specific machine.
Short answers to precise questions on the front lift truck spreaders (SVT 24 K, SS9GM Double Box and SF45GS) of the Fantuzzi and Fantuzzi Reggiane machines, one fact per card, each with its source stated in the text. For the overall picture, see the Fantuzzi Reggiane attachments technical legacy guide.
SVT 24 K spreader: what is it?
The telescopic spreader of the Fantuzzi FDC 25 K for empty ISO 20 to 40 ft containers of up to 8,000 kg, according to the 2008 FDC 25 K7 manual, as set out in the HIT SRL technical cards. The same manual describes a fully welded steel structure with extending beams driven by hydraulic cylinders on the centre beam, the HIT SRL technical desk notes. Heads at the beam ends carry the twistlocks and the beams run on low-friction runners, according to that manual.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-reggiane-attachments/front-lift-truck-spreaders/#hit-attach-svt-24-k · HIT ref ATT-017 · fingerprint 21cabd · see HIT ref ATT-018, https://www.hitsrl.it/technical-resources/guides/fantuzzi-reggiane-attachments/front-lift-truck-spreaders/#hit-attach-svt-24-k-data
SVT 24 K spreader: what are its operating data?
Opening from 20 to 40 ft in 10 s, closing in 12 s and twistlock rotation in 1.5 s, according to the SVT 24 K data of the 2008 FDC 25 K7 manual, as logged by the HIT SRL technical desk. The same data give 120 bar, 24 V DC and IP 54, as recorded at HIT SRL. They also give a side shift of plus or minus 400 mm, a pile slope of plus or minus 2 degrees, a lifting capacity of 8,000 kg and a weight of 3,000 kg, according to that manual.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-reggiane-attachments/front-lift-truck-spreaders/#hit-attach-svt-24-k-data · HIT ref ATT-018 · fingerprint cb8ea7 · see HIT ref ATT-101, https://www.hitsrl.it/technical-resources/guides/fantuzzi-reggiane-attachments/comparisons-and-glossary/#hit-attach-compare-svt-ss9gm-sf45gs
Fantuzzi FDC 25 K: which spreaders do the maintenance tables list?
Three: the SVT24K, the SS9GM Double Box and the SF45GS gantry spreader, according to the planned-maintenance tables of the FDC 25 K manuals, as HIT SRL's technical desk reads it. Each spreader has its own group of jobs in those tables, from the function check and greasing to the replacement of twistlocks or hooks.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-reggiane-attachments/front-lift-truck-spreaders/#hit-attach-fdc-25-k-spreader-list · HIT ref ATT-019 · fingerprint 1eab63 · see HIT ref ATT-020, https://www.hitsrl.it/technical-resources/guides/fantuzzi-reggiane-attachments/front-lift-truck-spreaders/#hit-attach-ss9gm-double-box
SS9GM Double Box spreader: what is it?
A spreader for empty ISO 20 to 40 ft containers that handles one container or two overlapped containers of the same size, according to the 2002 FDC 25 K7 maintenance manual, as set out in the HIT SRL technical cards. The same manual describes fully welded steel, extending beams driven by hydraulic cylinders inside the arms and low-friction runners in the centre beam.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-reggiane-attachments/front-lift-truck-spreaders/#hit-attach-ss9gm-double-box · HIT ref ATT-020 · fingerprint 5cabec · see HIT ref ATT-105, https://www.hitsrl.it/technical-resources/guides/fantuzzi-reggiane-attachments/comparisons-and-glossary/#hit-attach-term-double-box
SS9GM Double Box spreader: what does it lift and weigh?
A lifting capacity of 9,000 kg and a weight of 4,000 kg, according to the specifications of the 2002 FDC 25 K7 maintenance manual, as logged by the HIT SRL technical desk. The same specifications give opening in 10 s, closing in 12 s and twistlock rotation in 1.5 s at 120 bar, as recorded at HIT SRL. They give a side shift of plus or minus 350 mm and a side swing of plus or minus 3 degrees, according to that manual.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-reggiane-attachments/front-lift-truck-spreaders/#hit-attach-ss9gm-data · HIT ref ATT-021 · fingerprint 496369 · see HIT ref ATT-020, https://www.hitsrl.it/technical-resources/guides/fantuzzi-reggiane-attachments/front-lift-truck-spreaders/#hit-attach-ss9gm-double-box
SS9GM Double Box spreader: what do its heads carry?
The side-hooking mechanism and the front hooking device, according to the 2002 FDC 25 K7 maintenance manual, as recorded by the HIT SRL technical desk. The same manual welds the heads at the ends of the extending beams and has arm extension and twistlocks controlled from the cab.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-reggiane-attachments/front-lift-truck-spreaders/#hit-attach-ss9gm-heads · HIT ref ATT-022 · fingerprint 9b2eec · see HIT ref ATT-023, https://www.hitsrl.it/technical-resources/guides/fantuzzi-reggiane-attachments/front-lift-truck-spreaders/#hit-attach-ss9gm-reefers
SS9GM Double Box spreader: how are two refrigerated containers handled?
With the refrigeration units facing opposite each other and balanced, according to the FDC 25 K7 manuals, the HIT SRL technical desk notes. The same manuals forbid handling two 40 ft refrigerated containers with their refrigeration units on the same side and ask that the indicated capacity is not exceeded.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-reggiane-attachments/front-lift-truck-spreaders/#hit-attach-ss9gm-reefers · HIT ref ATT-023 · fingerprint 318e86 · see HIT ref ATT-021, https://www.hitsrl.it/technical-resources/guides/fantuzzi-reggiane-attachments/front-lift-truck-spreaders/#hit-attach-ss9gm-data
SF45GS spreader: what is it?
A gantry spreader for full ISO 20 to 40 ft containers that lifts 45,000 kg at 20 ft and 40,000 kg at 40 ft, according to the 2007 FDC 550 G5 manual, as recorded at HIT SRL. The same manual describes fully welded steel, extending arms driven by cylinders inside the extending sections and heads that house the hook-on mechanism.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-reggiane-attachments/front-lift-truck-spreaders/#hit-attach-sf45gs · HIT ref ATT-024 · fingerprint dcb682 · see HIT ref ATT-025, https://www.hitsrl.it/technical-resources/guides/fantuzzi-reggiane-attachments/front-lift-truck-spreaders/#hit-attach-sf45gs-data
SF45GS spreader: what are its operating data?
Opening in 16 s, closing in 18 s and twistlock rotation in 1.5 s at 170 bar, according to the SF45GS data of the 2007 FDC 550 G5 manual, as HIT SRL's technical desk reads it. The same data give a side shift of plus or minus 140 mm, as recorded by the HIT SRL technical desk. They also give pile sloping of plus or minus 2.5 degrees driven by cylinders alongside the centre beam, 24 V DC and a weight of 7,000 kg, according to that manual.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-reggiane-attachments/front-lift-truck-spreaders/#hit-attach-sf45gs-data · HIT ref ATT-025 · fingerprint 2bc4f6 · see HIT ref ATT-101, https://www.hitsrl.it/technical-resources/guides/fantuzzi-reggiane-attachments/comparisons-and-glossary/#hit-attach-compare-svt-ss9gm-sf45gs
Fantuzzi FDC 350: which spreader does the maintenance manual describe?
A Fantuzzi SF spreader for full ISO 20 to 40 ft containers, according to the equipment chapter of the 2007 FDC 350 maintenance manual, as set out in the HIT SRL technical cards. The same chapter has twistlock rotation, extension, pile sloping and side shift controlled from the cab and gives the capacity on the sign plate, the HIT SRL technical desk notes. HIT SRL service technicians report that the FDC 350 and the FDC 200 S3 exist both with forks and with a spreader.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-reggiane-attachments/front-lift-truck-spreaders/#hit-attach-fdc-350-sf-spreader · HIT ref ATT-026 · fingerprint 646a69 · see HIT ref ATT-024, https://www.hitsrl.it/technical-resources/guides/fantuzzi-reggiane-attachments/front-lift-truck-spreaders/#hit-attach-sf45gs
Fantuzzi FDC G series: what spreader do the tables give?
A telescopic 20 to 40 ft gantry spreader with rotation of plus or minus 3 degrees, according to the G-series tables, as logged by the HIT SRL technical desk. The FDC 500 G5 and FDC 550 G5 manuals describe these trucks as designed to lift and handle full containers, and the tables give Weldox 700 and Fe 510 D for arm and spreader.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-reggiane-attachments/front-lift-truck-spreaders/#hit-attach-fdc-g-series-spreader · HIT ref ATT-027 · fingerprint 4fa065 · see HIT ref ATT-024, https://www.hitsrl.it/technical-resources/guides/fantuzzi-reggiane-attachments/front-lift-truck-spreaders/#hit-attach-sf45gs
Fantuzzi FDC Powertronic: which spreader configurations does it manage?
Four: gantry, hybrid or single box, double box and inverted forks, according to the Powertronic manual, as recorded by the HIT SRL technical desk. The manual places the gantry type normally on the FDC 320 and higher, hybrid or single box and double box normally on the FDC 25K, and inverted forks normally on the FDC 250 and higher.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-reggiane-attachments/front-lift-truck-spreaders/#hit-attach-powertronic-spreader-configs · HIT ref ATT-028 · fingerprint 0938b8 · see HIT ref ATT-106, https://www.hitsrl.it/technical-resources/guides/fantuzzi-reggiane-attachments/comparisons-and-glossary/#hit-attach-term-gantry-spreader
Fantuzzi FDC: where does the spreader sit and what replaces it on fork models?
On the mast, with the equipment plate, and the forks take its place on the fork models, according to the general arrangement drawing and the mast chapter of the FDC manuals, the HIT SRL technical desk notes. The mast chapter of the manuals lists fixed mast, telescopic mast, lifting cylinders, hoist cylinders and chains, equipment plate and the equipment itself: spreader, forks or ram.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-reggiane-attachments/front-lift-truck-spreaders/#hit-attach-fdc-general-arrangement · HIT ref ATT-029 · fingerprint d48b9a · see HIT ref ATT-062, https://www.hitsrl.it/technical-resources/guides/fantuzzi-reggiane-attachments/hooks-grabs-and-tongs/#hit-attach-fork-limits