Fantuzzi FDC — Identification: technical cards
General guidance only — always follow the operation and maintenance manual for your specific machine.
Short answers to precise questions on the models, main data and documentation of the Fantuzzi FDC front lift trucks, one fact per card, each with its source stated in the text. For the overall picture, see the Fantuzzi FDC technical legacy guide.
Fantuzzi FDC: what kind of machine is it?
According to its manuals, the Fantuzzi FDC is a rubber-tyred front lift truck, documented in versions for empty containers, for full containers and, with forks, for heavy materials, as HIT SRL's technical desk reads it. The manuals of the FDC 25 K7, FDC 25 J7 and FDC 20 K6 describe it as specifically designed to lift and transport empty containers, while the FDC 500 G5 and FDC 550 G5 manuals describe a front fork-lift truck specially designed for full containers, the HIT SRL technical desk notes. Several manuals of the FDC 160 to FDC 480 describe a truck used with forks to lift and carry heavy materials, which can take special equipment such as a coil ram, a telescopic coil ram and log tongs; the 2013 manual of the FDC 200 names a coil boom, a telescopic coil boom and clamps, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-fdc/identification/#hit-fdc-what-kind-of-machine · HIT ref FDC-001 · fingerprint 907a35 · see HIT ref FDC-003, https://www.hitsrl.it/technical-resources/guides/fantuzzi-fdc/identification/#hit-fdc-empty-container-models
Fantuzzi FDC 25 K7: which main components does the general arrangement drawing name?
According to the general arrangement drawing of the FDC 25 K7 manual, eight main parts: front wheels, spreader, mast, lifting cylinder, tilting cylinder, operator's cab, hydraulic reservoir and rear wheels, as set out in the HIT SRL technical cards. The same drawing serves the empty-container FDC models, as recorded by the HIT SRL technical desk. On the fork models, as in the 2005 manual of the FDC 200, the forks take the place of the spreader.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-fdc/identification/#hit-fdc-main-components · HIT ref FDC-002 · fingerprint 54978c · see HIT ref FDC-001, https://www.hitsrl.it/technical-resources/guides/fantuzzi-fdc/identification/#hit-fdc-what-kind-of-machine
Fantuzzi FDC: which models are empty container handlers?
Four FDC models are described as empty container handlers in their manuals: the FDC 18 K, the FDC 20 K6, the FDC 25 K and the FDC 25 J7, as recorded at HIT SRL. Some editions describe a rubber-tyred front lift truck particularly suited to lifting and handling empty containers, and others one specifically designed to lift and transport them, as recorded by the HIT SRL technical desk. One specification table covers the FDC 25 K6, K7 and K8 together, the 2002 table of the FDC 20 K6 gives 9,000 kg capacity, and the 2006 manual of the FDC 25 J7 has a table headed FDC 25K.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-fdc/identification/#hit-fdc-empty-container-models · HIT ref FDC-003 · fingerprint 13ab36 · see HIT ref FDC-001, https://www.hitsrl.it/technical-resources/guides/fantuzzi-fdc/identification/#hit-fdc-what-kind-of-machine
Fantuzzi FDC 18 K: what are its capacity and main dimensions?
According to the specification table, the FDC 18 K has a capacity of 8,000 kg, a length of 5,800 mm, a width of 6,150 mm and a wheelbase of 4,000 mm, as HIT SRL's technical desk reads it. One table covers the FDC 18 K4, K5 and K6 together, in the 2002 and 2005 editions; it gives diesel propulsion, front drive and an empty weight to be read on the name plate, as recorded by the HIT SRL technical desk. The same table gives inner and outer turning radii of 800 and 5,500 mm and four front and two rear 12.00-24 tyres.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-fdc/identification/#hit-fdc-fdc-18k-data · HIT ref FDC-004 · fingerprint 86084a · see HIT ref FDC-006, https://www.hitsrl.it/technical-resources/guides/fantuzzi-fdc/identification/#hit-fdc-fdc-25k-data
Fantuzzi FDC 20 K6: how does it differ from the FDC 18 K?
In its specification table, the FDC 20 K6 differs from the FDC 18 K only in capacity: 9,000 kg instead of 8,000 kg, as set out in the HIT SRL technical cards. Its 2002 manual carries the model designation FDC 20 K6 in its specification table, the HIT SRL technical desk notes. All the other values of that table are equal to those of the FDC 18 K table, such as dimensions, tyres and propulsion, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-fdc/identification/#hit-fdc-fdc-20k6 · HIT ref FDC-005 · fingerprint 039b1a · see HIT ref FDC-004, https://www.hitsrl.it/technical-resources/guides/fantuzzi-fdc/identification/#hit-fdc-fdc-18k-data
Fantuzzi FDC 25 K: what are its capacity and main dimensions?
According to the specification table, the FDC 25 K has a capacity of 9,000 kg, a length of 6,300 mm, a width of 6,150 mm and a wheelbase of 4,500 mm, as logged by the HIT SRL technical desk. One table covers the FDC 25 K6, K7 and K8 together, in the editions of 2002 to 2008; it gives diesel propulsion, front drive and an empty weight to be read on the name plate, as recorded by the HIT SRL technical desk. The same table gives inner and outer turning radii of 800 and 6,000 mm and 14.00-24 tyres.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-fdc/identification/#hit-fdc-fdc-25k-data · HIT ref FDC-006 · fingerprint d71276 · see HIT ref FDC-004, https://www.hitsrl.it/technical-resources/guides/fantuzzi-fdc/identification/#hit-fdc-fdc-18k-data
Fantuzzi FDC 25 K6: which containers is it suitable for?
The FDC 25 K6 is suitable for empty containers of ISO dimensions from 20 to 40 feet, according to its 2007 manual, the HIT SRL technical desk notes. The same manual gives 30 feet as an option, as set out in the HIT SRL technical cards. In the same edition the specification table gives as the height with the mast closed the 4,500 mm that the other FDC 25 K tables give as the pitch, or wheelbase, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-fdc/identification/#hit-fdc-fdc-25k6-containers · HIT ref FDC-007 · fingerprint 82fbc7 · see HIT ref FDC-006, https://www.hitsrl.it/technical-resources/guides/fantuzzi-fdc/identification/#hit-fdc-fdc-25k-data
Fantuzzi FDC 25 J7: what does it weigh without load?
41,000 kg, according to the specification table of the 2006 manual of the FDC 25 J7, as recorded at HIT SRL. The table, headed FDC 25K, also gives a capacity of 9,000 kg. The same manual lists the engines of the FDC 25 K table without the Volvo TAD720VE, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-fdc/identification/#hit-fdc-fdc-25j7-weight · HIT ref FDC-008 · fingerprint 31ab8b · see HIT ref FDC-011, https://www.hitsrl.it/technical-resources/guides/fantuzzi-fdc/identification/#hit-fdc-g-series-weights
Fantuzzi FDC 25 K: what travel speed and noise levels does the table give?
The FDC 25 K specification table gives a travel speed of 25 km/h without load and 27 km/h with load, with noise levels of 85 dB(A) outside and 75 dB(A) in the cab, as HIT SRL's technical desk reads it. The FDC 18 K, FDC 20 K and FDC 25 J7 tables give the same figures, as logged by the HIT SRL technical desk. The speeds are reported here as printed, with the higher one against the loaded condition; the manuals give no explanation for this order, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-fdc/identification/#hit-fdc-k-series-speed-noise · HIT ref FDC-009 · fingerprint c7eef3 · see HIT ref FDC-010, https://www.hitsrl.it/technical-resources/guides/fantuzzi-fdc/identification/#hit-fdc-k-series-brakes-battery
Fantuzzi FDC 25 K: which brakes and batteries does the specification table give?
The K-series tables give servo-assisted front service brakes with wet discs, optional rear brakes and a mechanical disc parking brake, with 24 V batteries of 150 Ah, as set out in the HIT SRL technical cards. The optional rear brake is a wet disc in some editions of the tables and a dry disc in others, as recorded by the HIT SRL technical desk. The same tables give a hydrodynamic transmission with torque converter and refer to a separate engine table for the engine.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-fdc/identification/#hit-fdc-k-series-brakes-battery · HIT ref FDC-010 · fingerprint 475d23 · see HIT ref FDC-009, https://www.hitsrl.it/technical-resources/guides/fantuzzi-fdc/identification/#hit-fdc-k-series-speed-noise
Fantuzzi FDC 500 G5: how much does it weigh empty?
The FDC 500 G5 weighs 67,000 kg empty, according to the G-series specification tables, as logged by the HIT SRL technical desk. The same tables give 60,000 kg for the FDC 420 G3 and 64,000 kg for the FDC 450 G4, all three diesel machines on pneumatic tyres, with four driven front wheels and two rear wheels, as recorded at HIT SRL. The tables appear in the editions from 2002 to 2007, and the 2007 manual of the FDC 550 G5 reproduces them, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-fdc/identification/#hit-fdc-g-series-weights · HIT ref FDC-011 · fingerprint 26b71c · see HIT ref FDC-008, https://www.hitsrl.it/technical-resources/guides/fantuzzi-fdc/identification/#hit-fdc-fdc-25j7-weight
Fantuzzi FDC 500 G5: what else do the G-series specification tables give?
The G-series tables give a travel speed of 25 km/h empty and 24 km/h loaded, servo-assisted hydraulic steering, a drive axle with epicyclic reduction gears and four front and two rear 18.00-25 tyres inflated to 10 bar, the HIT SRL technical desk notes. Front service brakes are oil-bath and rear brakes optional with dry discs; the parking brake is a dry disc on the transmission, with mechanical release in the later tables and applied in the absence of oil pressure in the 2002 table, as set out in the HIT SRL technical cards. The tables also list 24 V batteries of 200 Ah, a torque-converter transmission with power-shift clutches and four forward and four reverse gears, Weldox 700 and Fe 510 D steels for arm and spreader, and noise levels of 85 dB(A) outside and 75 dB(A) in the cab, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-fdc/identification/#hit-fdc-g-series-specifications · HIT ref FDC-012 · fingerprint 8d62bb · see HIT ref FDC-010, https://www.hitsrl.it/technical-resources/guides/fantuzzi-fdc/identification/#hit-fdc-k-series-brakes-battery
Fantuzzi FDC 450 G4: what tank capacities does the table give?
The G-series specification tables give 807 litres of hydraulic fluid and 605 litres of fuel, the same for the FDC 420 G3, FDC 450 G4 and FDC 500 G5, as recorded at HIT SRL. These values appear in the 2002 and 2007 manuals, as recorded by the HIT SRL technical desk. The filling table of the FDC maintenance manual, which works by model group, gives 800 litres for the hydraulic system and 605 litres of fuel for the FDC 380, 420 and 450, and the same 800 litres for the FDC 500.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-fdc/identification/#hit-fdc-g-series-tanks · HIT ref FDC-013 · fingerprint dca731 · see HIT ref FDC-048, https://www.hitsrl.it/technical-resources/guides/fantuzzi-fdc/hydraulics/#hit-fdc-hydraulic-oil-capacity
Fantuzzi FDC 160 to FDC 280: what capacities does the 2013 table give?
The 2013 specification table gives rated capacities of 16,000 kg for the FDC 160, 18,000 kg for the FDC 180, 20,000 kg for the FDC 200, 25,000 kg for the FDC 250 and FDC 250 RoRo and 28,000 kg for the FDC 280, as HIT SRL's technical desk reads it. The table gives total weights of 24,000, 24,500, 32,000, 34,000, 40,000 and 36,000 kg in the same order, as logged by the HIT SRL technical desk. The masts are two-stage, except the three-stage mast of the FDC 250 RoRo, and in the 2013 edition the FDC 160 and FDC 180 run on 12.00-24 tyres and the other models on 14.00-24, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-fdc/identification/#hit-fdc-fork-trucks-2013-capacities · HIT ref FDC-014 · fingerprint 76577a · see HIT ref FDC-015, https://www.hitsrl.it/technical-resources/guides/fantuzzi-fdc/identification/#hit-fdc-fdc-200-2013-data
Fantuzzi FDC 200: what are its main data in the 2013 manual?
In the 2013 table the FDC 200 has a capacity of 20,000 kg and a total weight of 32,000 kg, with the Volvo TAD 750 VE as standard engine and a Dana TE17 gearbox with three forward and three reverse gears, as set out in the HIT SRL technical cards. The table gives travel speeds of 25 km/h full and 27 km/h empty and lifting speeds of 0.31 and 0.33 m/s, full and empty, the HIT SRL technical desk notes. The same table gives 14.00-24 tyres, 180 bar hydraulic pressure, a 460 l fuel tank, a 425 l hydraulic oil tank and a stability factor of 1.45, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-fdc/identification/#hit-fdc-fdc-200-2013-data · HIT ref FDC-015 · fingerprint d53dc0 · see HIT ref FDC-033, https://www.hitsrl.it/technical-resources/guides/fantuzzi-fdc/transmission-and-driveline/#hit-fdc-gearboxes-2013
Fantuzzi FDC 250: what are its capacity and dimensions in the 2005 table?
The 2005 table of the FDC 250 gives a capacity of 25,000 kg and an empty weight of 38,000 kg, as logged by the HIT SRL technical desk. It also gives a length of 6,350 mm, a width of 3,000 mm, a wheelbase of 4,200 mm and an inner and outer turning radius of 980 and 6,700 mm, with four front and two rear 14.00-24 tyres and 24 V batteries of 150 Ah, as recorded at HIT SRL. The same manual adds a travel speed of 25 km/h empty and 20 km/h loaded, noise levels of 85 and 75 dB(A) and a vibration level at the operator's station of 0.42 m/s2, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-fdc/identification/#hit-fdc-fdc-250-data · HIT ref FDC-016 · fingerprint b1a046 · see HIT ref FDC-004, https://www.hitsrl.it/technical-resources/guides/fantuzzi-fdc/identification/#hit-fdc-fdc-18k-data
Fantuzzi FDC 350: which equipment does its manual describe?
The 2007 manual of the FDC 350 describes a Fantuzzi SF spreader for full ISO containers of 20 to 40 feet, with twistlock rotation, extension, pile sloping and side shift controlled from the cab, and with its capacity given on the sign plate, as recorded by the HIT SRL technical desk. The same manual opens with the general description used for the empty-container models, as does the 2005 manual of the FDC 200 S3, as HIT SRL's technical desk reads it. Equipment also varies under one designation in the Powertronic manual, which lists the FDC 320 and FDC 420 with forks or with a spreader. HIT SRL service technicians report that the FDC 350 and the FDC 200 S3 exist both with forks and with a spreader.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-fdc/identification/#hit-fdc-fdc-350-equipment · HIT ref FDC-017 · fingerprint 2ab9af · see HIT ref FDC-067, https://www.hitsrl.it/technical-resources/guides/fantuzzi-fdc/mast-and-spreader/#hit-fdc-spreader-types
Fantuzzi FDC: who owns the Fantuzzi brand today?
Konecranes states that it has owned the Fantuzzi Reggiane brand since 2017, that new Fantuzzi Reggiane machines are no longer available and that it is the official provider of support and genuine spare parts for them, the HIT SRL technical desk notes. Published sources state that Terex agreed to buy the Fantuzzi port equipment business in August 2008, terminated that agreement in December 2008, returned to it in 2009 and completed the acquisition, together with Noell Crane, in July 2009, as set out in the HIT SRL technical cards. The same sources state that Konecranes agreed on 16 May 2016 to acquire Terex Material Handling & Port Solutions and completed the acquisition on 4 January 2017. For the earlier step, a local newspaper dates the passage of the Reggiane works to Fantuzzi to 1994 and one published source gives 1992; HIT SRL service technicians report 1994 as the correct year.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-fdc/identification/#hit-fdc-brand-ownership-history · HIT ref FDC-018 · fingerprint 0489f3 · see HIT ref FDC-019, https://www.hitsrl.it/technical-resources/guides/fantuzzi-fdc/identification/#hit-fdc-mi-jack-sky-packer
Fantuzzi FDC: what is the link with the Mi-Jack Sky Packer?
The Mi-Jack operator's manual for the Sky Packer MJ18H6 states that the machine is manufactured by Fantuzzi, as recorded at HIT SRL. The MJ 150/600 manual shares the 140-job planned-maintenance table of the FDC manuals. HIT SRL service technicians report that the Mi-Jack Sky Packer MJ18H6 and MJ 150/600 are FDC machines built by Fantuzzi for Mi-Jack.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-fdc/identification/#hit-fdc-mi-jack-sky-packer · HIT ref FDC-019 · fingerprint e05d47 · see HIT ref FDC-018, https://www.hitsrl.it/technical-resources/guides/fantuzzi-fdc/identification/#hit-fdc-brand-ownership-history
Fantuzzi FDC 25 K7: what are the SkyStacker and the Double Box?
SkyStackers is the name under which a Fantuzzi brochure presents the FDC 25K6, FDC 25K7 and FDC 25K8 together, and Double Box names the SS9GM spreader that the FDC 25 K7 manuals cover besides the standard spreader, as HIT SRL's technical desk reads it. The Double Box has its own maintenance jobs and handling rules in those manuals, as logged by the HIT SRL technical desk. A separate Fantuzzi brochure presents the FDC 25K7 Double Box, as recorded by the HIT SRL technical desk.
Source: HIT SRL technical desk — https://www.hitsrl.it/technical-resources/guides/fantuzzi-fdc/identification/#hit-fdc-skystackers-and-double-box · HIT ref FDC-020 · fingerprint 4a3480 · see HIT ref FDC-092, https://www.hitsrl.it/technical-resources/guides/fantuzzi-fdc/maintenance-intervals/#hit-fdc-double-box-intervals